Reverse Automatic Braking System 395
NOTE
When the settings cannot be changed,
the ON/OFF setting key will be grayed
out.
Also, the following settings can be changed
by operating the center information
display.
. Warning volume
. Sonar audible alarm
For details, refer to “Car settings” ☞P215.
& RAB Warning Indicator
s07bn07
& Handling of the Sonar Sensors
s07bn06
The 4 sonar sensors are located in the rear
bumper. To ensure the proper operation of
the Reverse Automatic Braking system,
observe the following precautions.
. Do not apply strong impacts to the rear
bumper near the sonar sensors. If a sensor
becomes misaligned, a system malfunction
may occur, including inability to detect
objects in the reversing direction. If any
strong impact is applied to the rear
bumper, contact a SUBARU dealer to
have the system inspected.
. Do not disassemble the sonar sensors.
NOTE
If the sonar sensors require repair or
replacement, or if the area of the rear
bumper near the sonar sensors requires
repair, paintwork or replacement,
contact your SUBARU dealer for
assistance.
7
If the Reverse Automatic Braking System
malfunctions, the above indicator illuminates
on the combination meter. Contact
the nearest SUBARU dealer for details.
. Do not affix any stickers or other items
on the sonar sensor or the bumper surface
near the sonar sensors.
. Always keep the sonar sensor and the
rear bumper surface near the sonar
sensors clean.
. Do not modify rear bumper.
. Do not paint the bumper near the sonar
sensors.
. Do not apply high pressure water to the
sonar sensors with a high pressure carwashing
machine.
Starting and Operating