Combination Meter Display (Color LCD) 199
welcome screen will not appear even
when the driver’s door is opened and
closed.
. The welcome screen will disappear
when you lock the driver’s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the welcome
screen is displayed.
. The welcome screen including the
audio/navigation unit can be set to on
or off.
. The welcome screen can be set to on
or off. For details, refer to “General
settings” ☞P211 (11.6-inch display
models) or “General settings” ☞P229
(dual 7.0-inch display models).
. The good-bye screen can be set to
on or off. For details, refer to “General
settings” ☞P211 (11.6-inch display
models) or “General settings” ☞P229
(dual 7.0-inch display models).
& Warning Screen
s03bn05
Example of warning
If there is a warning message or a
maintenance notification, it will appear on
combination meter display (color LCD).
Take the appropriate actions based on the
messages indicated.
& Meter Information Screen
s03bn12
The meter information screen can be
changed. For details, refer to “General
settings” ☞P211 (11.6-inch display models)
or “General settings” ☞P229 (dual
7.0-inch display models).
! ECO gauge
s03bn1201
The ECO gauge shows the difference
between the average rate of fuel consumption
since the trip meter was last
reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel
efficiency as shown in the following chart.
Displayed unit
Needle position
“+” side “−” side
MPG Better Poorer
l/100km Poorer Better
3
Instruments and Controls
– CONTINUED –