Subaru Outback Manuals 2020 Outback Owner's Manual | Page 206

198 Combination Meter Display (Color LCD) Speed Screen” ☞P204.) 5) Telltale screen (Refer to “Telltale Screen” ☞P200.) 6) Select lever/gear position indicator (Refer to “Select Lever/Gear Position Indicator” ☞P193.) 7) X-MODE indicator (Outback) (Refer to “X-MODE Indicator (Outback)” ☞P195.) SI-DRIVE indicator (if equipped) (Refer to “SI-DRIVE Indicator Light” ☞P193.) 8) Odometer (Refer to “Odometer” ☞P171.)/Double trip meter (Refer to “Double Trip Meter” ☞P172.) *: For details, refer to the separate EyeSight Owner’s Manual. & Basic Operation Control switches 1) 2) 3) s03bn01 By operating or of the control switches, the screens can be changed. If there are some useful messages, such as vehicle information, warning information, etc., they will interrupt the current screen, and appear on the display accompanied by a beep. If such a screen is displayed, take proper action according to the message shown on the screen. The warning screen will return to the original screen after a few seconds. While the information reminder is shown on the display, it may be possible to display the warning screen again. To recall the message marked with on the display, pull the switch on the steering wheel toward you. & Welcome Screen (Opening Animation) and Good-Bye (Ending Animation) Screen s03bn08 When the driver’s door is opened and closed after unlocking the door, the welcome screen (opening animation) will appear on the combination meter display (color LCD) for approximately 20 seconds. When the ignition switch is turned to the “LOCK”/“OFF” position, the combination meter display (color LCD) gradually turns off by showing good-bye screen (ending animation). NOTE . The welcome screen and the goodbye screen may differ in the actual words and appearance. . The basic screen will be shown when the ignition switch is turned to the “ON” position while the welcome screen is displayed. . Once the welcome screen appears, it takes a certain period of time to display it again. . If the ignition switch is operated after unlocking the driver’s door, the