Keyless Access with Push-Button Start System 125
entry system
. Open a door and then close it
. Turn the push-button ignition switch to
the “ON” position
& Power Saving Function of
Access Key Fob
s02ap26
This function stops the access key fob
from receiving signals and helps minimize
the battery consumption of the access key
fob.
1. Press the “ ” button twice while holding
the “ ” button.
1) LED indicator
2. Confirm that the LED indicator blinks 4
times to notify that the setting is complete.
When the access key fob is in the power
save mode, the keyless access function
and push-button start system will not be
available.
To cancel the power save mode, press one
of the buttons on the access key fob.
& Disabling Keyless Access
Function
s02ap07
WARNING
If you have an implanted pacemaker
or an implanted defibrillator, perform
the procedure “By operating
the driver’s door” ☞P127 to disable
the keyless access function. If you
perform the procedure “By operating
the access key fob” ☞P126, the
operation of an implanted pacemaker
or implanted defibrillator
may be affected by the radio waves
from the transmitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the keyless
access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. To start the engine while the functions
are disabled, perform the procedure
described in “Starting Engine”
☞P459.
2
Keys and Doors
– CONTINUED –