Subaru Outback Manuals 2018 Outback Owner's Manual | Page 346

7-66 Starting and operating/Reverse Automatic Braking System & Canceling the Reverse Auto- matic Braking system opera- tion & RAB warning indicator S07BN07 S07BN05 While the select lever is shifted to the “R” position, the below functions of the Re- verse Automatic Braking system can be set by operating the audio/navigation monitor. S07BN04 The Reverse Automatic Braking system can be temporarily canceled by any of the following operation. . While the vehicle is stopped by the operation of automatic braking, the brake pedal is depressed. . While the vehicle is stopped by the operation of automatic braking, the accel- erator pedal is depressed. . The accelerator pedal is depressed continuously (In this case, limited accel- eration will be canceled and the vehicle will continue reversing.) . The select lever is shifted to a position other than the “R” position. NOTE The system will be canceled if the object is no longer detected. & Reverse Automatic Braking system ON/OFF setting If the Reverse Automatic Braking System malfunctions, the above indicator illumi- nates on the combination meter. Contact the nearest SUBARU dealer for details. 1) 2) 3) 4) ON setting key of Reverse Automatic Braking OFF setting key of Reverse Automatic Braking ON setting key of the object detection warning beeping sound OFF setting key of the object detection warning beeping sound When the ON setting key is shown, the corresponding setting is ON. Touch and hold the ON setting key to turn the setting OFF.