Subaru Outback Manuals 2016 Outback Owner's Manual | Page 137

Keys and doors/Windows operate. The window can be raised by pulling up on the switch several times until the window is fully closed. To reset to normal operation, initialize the power window to reactivate the one-touch auto up/down function. Re- fer to “Initialization of power window” F2-37. This switch also has a one-touch auto up function that allows the window to be closed fully without holding the switch. Pull the switch up until it clicks and release it, and the window will fully close. To stop the window halfway, press the switch down lightly. NOTE If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the one-touch auto up/down function is deactivated. Initi- alize the power window to reactivate the one-touch auto up/down function. Refer to “Initialization of power win- dow” F2-37. ! Anti-entrapment function CAUTION . Never attempt to test this func- tion using fingers, hands or other parts of your body. . The anti-entrapment function may not operate properly if some object gets trapped just before the window fully closes. 2-35 tial enough object trapped between the window and the window frame, it auto- matically moves down slightly and stops. ! Operating the rear passengers’ windows NOTE . If a window detects an impact simi- lar to that caused by trapping an object (for example, when the vehicle encoun- ters a deep pothole), the anti-entrap- ment function may operate. . The window cannot be operated for a few seconds after the anti-entrap- ment function operates. . If the vehicle’s battery is discon- nected due to situations such as battery or fuse replacement, the anti- entrapment function is deactivated. Initialize the power window to reacti- vate the anti-entrapment function. Re- fer to “Initialization of power window” F2-37. While closing with the one-touch auto up function, if the window senses a substan- To open: Press the appropriate switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position. CONTINUED