Subaru Outback Manuals 2013 Outback Owner's Manual | Page 452

11-44 Maintenance and service prints or grease on the bulb surface, wipe them away with a soft cloth moistened with alcohol. counterclockwise. NOTE . If headlight aiming is required, consult your SUBARU dealer for proper adjustment of the headlight aim. . It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. ! Low beam light bulbs 1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F117. 3. Disconnect the electrical connector. 5. Replace the bulb, then set the retainer spring securely. 6. Reconnect the electrical connector. 7. Install the bulb cover. 4. Remove the retainer spring. 2. Remove the bulb cover, by turning it 8. After replacing the bulb, reattach the fender lining.