Keys and doors
The function’s operational/non-operational
setting and the time until automatic locking
takes place can be changed by a
SUBARU dealer. For more details, contact
a SUBARU dealer.
! Door unlock selection function
The door unlock selection function makes
the following operations possible.
. Unlocking the driver’s door without
unlocking any other doors (including the
rear gate) when gripping the driver’s door
handle
. Opening the rear gate without unlocking any doors when pressing the rear gate
opener button
The operational/non-operational setting
for this function can be changed by a
SUBARU dealer.
Operational:
. Only the driver’s door will be unlocked
when the driver’s door handle is gripped.
. The rear gate will open, but the other
doors will remain locked when the rear
gate opener button is pressed.
Non-operational:
. All doors and the rear gate will be
unlocked when the driver’s door handle is
gripped.
. The rear gate will open and all doors
2-17
will be unlocked when the rear gate
opener button is pressed.
& Disabling keyless access
function
The factory setting (default setting) is set
as “operational”.
For further details, consult a SUBARU
dealer.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the
keyless access function can be disabled.
& Selecting audible signal operation
NOTE
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
& Warning chimes and warning
light
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning light on
the combination meter in order to minimize
improper operations and help protect your
vehicle from theft.
For details, refer to “Warning chimes and
warning light of the keyless access with
push-button start system” F3-25.
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more details,
contact a SUBARU dealer.
. To start the engine while the functions are disabled, perform the procedure described in “Starting engine”
F9-21.
. We recommend that you disable the
keyless access functions under the
following conditions.
– When the vehicle is not going to
be used for an extended period of
time
– When the keyless access functions are not going to be used
– When the access key needs to be
stored inside or near the vehicle
– CONTINUED –