2-16
Keys and doors
! Locking with the door lock button
! Locking with the rear lock button
Case 2: When the access key has been
left in the operating range for 10 minutes
or longer while all doors are locked
! Recovery from power saving mode
When one of the following is operated, the
keyless access function will be recovered.
Case 1:
. Unlock the doors by operating any
procedure other than gripping the door
handle
. Lock the doors
. Open a door and then close it
1)
Door lock button
Carry the access key, close all doors
including the rear gate and press the door
lock button on the door handle. All doors
including the rear gate will be locked. Also,
an electronic chirp will sound once and the
hazard warning flashers will flash once.
1)
Rear lock button
Carry the access key, close all doors
including the rear gate and press the rear
lock button. The rear gate and all doors
will be locked. Also, an electronic chirp will
sound once and the hazard warning
flashers will flash once.
! Power saving function
The keyless access function will be
disabled in the following cases to protect
the access key battery and the vehicle
battery.
Case 1: When the keyless access function and the remote keyless entry system
have not been used for 2 weeks or longer
while all doors are locked
Case 2:
. Unlock the doors by gripping the door
handle
. Unlock the doors by pressing the rear
gate opener button
. Lock the doors by pressing the door
lock button
. Lock or unlock the doors by using the
remote keyless entry system
. Lock or unlock the doors by using the
power door locking switch
. Open either of the front doors
! Automatic locking
If any of the doors or the rear gate was not
opened within 30 seconds after unlocking,
they will be automatically locked again.