Subaru Outback Manuals 2013 EyeSight® Driving Assist System Manual | Page 58

Lane Departure Warning Turning off Lane Departure Warning Press and hold the Lane Departure Warning OFF switch for approximately 2 seconds or longer to turn off the Lane Departure Warning. When this function is turned off, the Lane Departure Warning OFF indicator light on the instrument panel will illuminate. To turn the function back on, press and hold the Lane Departure Warning OFF switch again for approximately 2 seconds or longer. When the function is turned on, the Lane Departure Warning OFF indicator light turns off. OFF OFF S00378 S00583 NOTE When the Lane Departure Warning is turned off, the Lane Sway Warning is also turned off. Even when the Lane Departure Warning is turned off, if the ignition switch is turned off and then the engine is restarted, the Lane Departure Warning will be turned on. The default setting for the Lane Departure Warning when the vehicle is restarted is “ON”. I Lane Departure Warning OFF indicator light This indicator illuminates when the ignition switch is turned to the ON position, and then approximately 7 seconds after the engine starts, it turns off depending on the current status (ON or OFF). It turns off when the Lane Departure Warning is turned off. It also illuminates under the following conditions. When the VDC OFF switch is pressed and VDC is canceled When the EyeSight system has a malfunction * Refer to page 71. When the EyeSight system has stopped temporarily * Refer to page 72. 56 S00534