Subaru Outback Manuals 2013 EyeSight® Driving Assist System Manual | Page 57

Lane Departure Warning CAUTION In the following situations, the Lane Departure Warning will or may not activate: Vehicle speed is approximately 32 MPH (50 km/h) or less. For approximately 7 seconds after the Lane Departure Warning activates once When the steering wheel is turned significantly to either side When the brake pedal is depressed or immediately after it is depressed When the accelerator pedal is almost fully depressed and the vehicle is accelerating or immediately after accelerating When the following distance behind a vehicle in front is short While the turn signal is operating and for approximately 7 seconds after the turn signal lever has returned to its original position When the vehicle has not returned to the inside of the lane after the Lane Departure Warning has activated The lane is narrow. When it is difficult for the camera to detect lane markings - There are no lane markings (white lines, etc.) or they are very worn. - It is difficult to detect lane markings as they are similar in color to the road surface. - The lane markings are narrow. When the lead vehicle has taken measures to avoid an obstacle and following this you have performed steering operations NOTE The following situations may cause incorrect lane detection and a faulty Lane Departure Warning to occur. - Tire tracks on a wet road or snow-covered road - Boundaries between snow and asphalt, marks from road repair, etc. - Double lane lines, etc. - Shadows of guardrails, etc. When the Lane Departure Warning OFF indicator light is illuminated, the Lane Departure Warning is inactive. 55