Subaru Outback Manuals 2013 EyeSight® Driving Assist System Manual | Page 15

About EyeSight G CRUISE indicator This indicator illuminates when the main cruise control is activated. : Adaptive Cruise Control (Adaptive Cruise Control indicator) : Conventional Cruise Control (Conventional Cruise Control indicator) * Refer to page 25. G SET indicator illuminates when cruise control is set. * Refer to page 25. G HOLD indicator illuminates when the stay-stopped function is operated while Adaptive Cruise Control is on. * Refer to page 25. G READY indicator illuminates when Adaptive Cruise Control can be set. * Refer to page 25. G OFF indicator illuminates when Adaptive Cruise Control has been automatically canceled. * Refer to page 34. G Lead vehicle indicator When Adaptive Cruise Control is set or when the vehicle is stopped, this indicator illuminates when a vehicle in front has been detected. This indicator illuminates in the following cases. - The Lead Vehicle Start Alert is active. - The Pre-Collision Braking System is active. - The “brake more” warning is active. - Pre-Collision Throttle Management is active. These indicators also flash if, after Adaptive Cruise Control is set, it is automatically canceled because a vehicle in front of your vehicle is now out of the detectable range of the EyeSight cameras. * Refer to page 25. G Following distance setting indicator Indicates the following distance setting that was set with the following distance setting switch. * Refer to page 25. G Set vehicle speed display Displays the set vehicle speed. * Refer to page 25. 13