11-50
Maintenance and service
! High beam light bulbs
counterclockwise.
1. Remove the air intake duct (right-hand
side). For the method to remove the air
intake duct, refer to “Removing air intake
duct” F11-7.
3. Disconnect the electrical connector.
5. Replace the bulb, then set the retainer
spring securely.
6. Reconnect the electrical connector.
7. Install the bulb cover.
Left-hand side
2. Use a screwdriver to remove the
secured clip of the washer tank. To make
it easy to access the bulb, move the
washer tank to the horizontal direction
(left-hand side).
4. Remove the retainer spring.
8. After replacing the bulb, reattach the
fender lining.