2-22
Keys and doors
held.
For some models, this switch also has a
one-touch auto up function that allows the
window to be closed fully without holding
the switch.
Pull the switch up until it clicks and release
it, and the window will fully close. To stop
the window halfway, press the switch
down lightly.
NOTE
If the vehicle’s battery is disconnected
due to situations such as battery or
fuse replacement, the one-touch auto
up/down function is deactivated. Initialize the power window to reactivate
the one-touch auto up/down function.
Refer to “Initialization of power window” F2-24.
! Anti-entrapment function
CAUTION
. Never attempt to test this function using fingers, hands or other
parts of your body.
. The anti-entrapment function
may not operate properly if some
object gets trapped just before
the window fully closes.
NOTE
. If a window detects an impact similar to that caused by trapping an object
depending on the driving conditions,
the anti-entrapment function may operate.
. The window cannot be operated for
a few seconds after the anti-entrapment function operates.
. If the vehicle’s battery is disconnected due to situations such as
battery or fuse replacement, the antientrapment function is deactivated.
Initialize the power window to reactivate the anti-entrapment function. Refer to “Initialization of power window”
F2-24.
While closing automatically, if the window
senses a substantial enough object
trapped between the window and the
window frame, it automatically moves
down slightly and stops.
! Operating the passengers’ windows
To open:
Press the appropriate switch down and
hold it until the window reaches the
desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.