Child Restraint Systems 73 |
||||||||
|
refer to “ Top Tether Anchorages ” FP75 .
! To install a child restraint system using lower and tether anchorages s01ag070103
WARNING
Before installing a child restraint system , be sure to confirm that the seatback is securely locked into place . Otherwise , in an accident , serious injury or death could result .
1 . Move the seatback back and forth to confirm that it is securely locked into place . – Check that the red colored unlocking marker on the lock release button is not visible . For details , refer to “ Folding Down the Rear Seatback ” FP42 .
|
For U . S . -spec . models |
Each lower anchorage is located behind the cover of seatback bottom .
CAUTION
When you install a child restraint system , follow the manufacturer ’ s instructions supplied with it . After installing the child restraint system , check to ensure that it is held securely in position . If it is not held tight and secure , the danger of your child suffering personal injury in the event of an accident may be increased .
|
1
Seat , Seatbelt and SRS Airbags
|
|||||
|
Other models
2 . You will find “ ” marks at the bottoms of the rear seatback . These marks indicate the positions of the lower anchorages ( bars ).
|
||||||||
Peel off the anchorage cover completely from the selected side of the rear seatback to expose the anchorages ( bars ) to be used for installation of the child restraint |
||||||||
– CONTINUED – |