CAUTION |
||||||
|
Outback / Subaru Outback Wilderness
2 . Pry off the cover on the rear bumper using a screwdriver , and you will find a threaded hole for attaching the towing hook .
|
4 . Tighten the towing hook securely using the jack handle and wheel nut wrench .
After towing , remove the towing hook from the vehicle and stow it in the under-floor storage compartment .
Fit the towing hook cover on the bumper .
|
To prevent deformation to the bumper and the towing hook , do not apply excessive load to the towing hook .
Front tie-down hooks :
|
In Case of Emergency
9
|
|||
WARNING |
||||||
3 . Screw the towing hook into the |
. Do not use the towing hook for purposes other than towing your vehicle .
. Be sure to remove the towing hook after towing . Leaving the towing hook mounted on the vehicle could interfere with prop-
|
The front tie-down hooks are located between each of the front tires and the front bumper .
Front Tie-down Hooks are for tying down the vehicle . They are not for towing .
|
||||
– CONTINUED – |