492
Towing
pry open the cover .
3 . Screw the towing hook into the threaded hole until the threads can no longer be seen .
After towing , remove the towing hook from the vehicle and stow it in the under-floor storage compartment .
Fit the towing hook cover on the bumper .
WARNING
. Do not use the towing hook for purposes other than towing your vehicle .
. Be sure to remove the towing hook after towing . Leaving the towing hook mounted on the vehicle could interfere with proper operation of the SRS airbag system in a frontal collision .
CAUTION
To prevent deformation to the bumper and the towing hook , do not apply excessive load to the towing hook .
Rear towing hook :
1 . Take out the screwdriver , towing hook , wheel nut wrench and jack handle from the under-floor storage compartment .
1 ) Towing hook covers ( Depending on the vehicle , there may be only one cover .)
Legacy
4 . Tighten the towing hook securely using the jack handle and wheel nut wrench .