Driver Monitoring System 437 |
|||
|
. When the synchronized user function is turned OFF , manual repeat facial scan is not possible .
& Registering and Deleting a User s07bp05
Users can be registered in the Driver Monitoring System , and registered users can be deleted . For the user registration and delete procedures , refer to “ Driver Monitoring System ” FP233 .
NOTE
. When the Driver Monitoring System OFF indicator , Driver Monitoring System temporary stop indicator , or Driver Monitoring System warning is illuminated , the following items cannot be selected . – Register User – Delete User – Delete All Users . User information can also be deleted by resetting the center information display to the factory default settings . When the settings are reset to the factory default settings , all user information is deleted . The settings cannot be reset to the factory default settings when the Driver Monitoring System is OFF .
|
& Registering and Deleting Driver Position Personalization
s07bp06
At the time when a user is registered , the seat position , outside mirror angle , and reverse tilt-down outside mirror angle are registered at the same time . To change the setting for the seat position , outside mirror angle , or reverse tilt-down outside mirror angle , refer to “ Driver Monitoring System ” FP233 .
NOTE
. Start the user registration after adjusting the seat position , outside mirror angles , and reverse tilt-down outside mirror angle . If they are adjusted during user registration , it may be disrupted . Refer to “ Power Seat ” FP32 or “ Outside Mirrors ” FP295 . . If the ignition switch is turned to the “ OFF ” position before user registration is complete , the information of the adjusted seat position , outside mirror angle , and reverse tilt-down outside mirror angle will not be saved . . When the user recognition setting is OFF , or when the Driver Monitoring System OFF indicator , Driver Monitoring System temporary stop indicator , or Driver Monitoring System warning is illuminated , the following items cannot be selected .
|
– Update Seat and Mirror Position
– Delete Driver Position . The driver position can be registered or deleted only when a registered user is sitting in the driver ’ s seat and user recognition is completed .
& Driver Monitoring System ON / OFF Settings s07bp07
NOTE
. When the Driver Monitoring System is turned OFF after user recognition was completed , the user recognition function stores the Driver Monitoring System ON / OFF state . . Even when the Driver Monitoring System is set to OFF , the Driver Monitoring System automatically turns ON once the driver ’ s door is opened and closed while the vehicle is stopped . This only occurs when the user recognition setting is ON . The system then reverts automatically to the OFF state . . After the Driver Monitoring System was turned OFF , if the Driver Monitoring System is turned ON while the driver ’ s door is open , user recognition may not occur correctly .
|
7
Starting and Operating
|
– CONTINUED – |