Subaru Legacy Manuals 2019 Legacy Owner's Manual | Page 241

Instruments and controls/Tilt/telescopic steering wheel & Outside mirrors ! Remote control mirror switch S03AP03 S03AP0302 Tilt/telescopic steering wheel S03BF ! Convex mirror (passenger side) S03AP0301 WARNING WARNING Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror. Do not use the convex mirror to judge the distance of vehicles behind you when chan- ging lanes. Use the inside mirror (or glance backwards) to determine the actual size and distance of objects that you view in convex mirror. CAUTION Make sure to adjust the mirrors before driving. 3-85 : Select side to adjust : Direction control The remote control mirrors operate only when the ignition switch is in the “ON” or “ACC” position. 1. Turn the control switch to the side that you want to adjust. “L” is for the left mirror, “R” is for the right mirror. 2. Move the control switch in the direction you want to move the mirror. 3. Return the control switch to the neutral position to prevent unintentional opera- tion. . Do not adjust the steering wheel tilt/telescopic position while driv- ing. This may cause loss of vehicle control and result in per- sonal injury. . If the lever cannot be raised to the fixed position, adjust the steering wheel again. It is dangerous to drive without locking the steering wheel. This may cause loss of vehicle control and result in per- sonal injury. The mirrors can also be adjusted manu- ally. – CONTINUED –