3-32
Instruments and controls/Information display
& BSD/RCTA OFF indica-
tor (if equipped)
increased to 418F (58C) or higher.
S03AE86
This indicator appears on the combination
meter display when the BSD/RCTA OFF
switch is pressed to deactivate the BSD
(Blind Spot Detection) and RCTA (Rear
Cross Traffic Alert), or when the BSD/
RCTA is suspended temporarily. For de-
tails, refer to “BSD/RCTA OFF switch” F7-
56.
& Icy road surface warn-
ing indicator
S03AE82
When the outside temperature is 378F
(38C) or less, the icy road surface warning
indicator will illuminate to inform the driver
that the road surface may be frozen.
NOTE
. The outside temperature indicator
shows the temperature in the area
around the sensor. Therefore, the tem-
perature indication may differ from the
actual outside air temperature.
. The icy road surface warning indi-
cator should be treated only as a guide.
Be sure to check the condition of the
road surface before driving.
. Once the icy road surface warning
indicator appears, it will not disappear
unless the outside temperature has
Information display
S03AZ
& RAB warning
indicator (if equipped)
S03AE91
This indicator illuminates if the Reverse
Automatic Braking System malfunctions.
Refer to “Reverse Automatic Braking
System” F7-59.
& RAB OFF indicator (if
equipped)
S03AE92
This indicator illuminates when the Re-
verse Automatic Braking System is turned
OFF, or when the Reverse Automatic
Braking System is suspended temporarily.
Refer to “Reverse Automatic Braking
System” F7-59.
& Sonar audible alarm
OFF indicator (if
equipped)
S03AE93
This indicator illuminates when the sonar
audible alarm is turned OFF. For the
setting procedure, refer to “Sonar Audible
Alarm” F3-46.
1)
2)
3)
Clock
Climate control mode indicators
Outside temperature indicator
With the ignition switch in the “ACC”
position, the clock appears on the display.
With the ignition switch in the “ON” posi-
tion, the outside temperature indicator,
climate control mode indicators and clock
appear on the display.