Door Locks 129 |
||||||||
|
. When unlocking the door by the power door locking switches, automatic door unlocking will not operate.
. If the system detects a strong enough impact to deploy the airbags, all doors may be automatically unlocked. For further details, refer to“ Automatic Door Locking / Unlocking Operation When Involved in an Accident” FP416.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
|
& Key Lock-In Prevention Function s02ac06
Under the following conditions, all the doors will not lock when the power door locking switch is pushed with the driver’ s door open.
. The key is still in the ignition switch( models without“ keyless access with
|
push-button start system”).
. The ignition switch is in the“ ACC” or“ ON” position( models with“ keyless access with push-button start system”).
NOTE
. When leaving the vehicle, make sure you are holding the key before locking the doors.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
. The factory setting( default setting) for this function is set as“ operational”. This function’ s operational / non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details.
|
! Non-operation of key lock-in prevention function s02ac0602
When the system is set so that it does not operate, the doors are locked by the following operation.
. If the lock lever is turned to the front(“ LOCK”) position with the driver’ s door open and the driver’ s door is then closed with the lock lever in that position, the driver’ s door is locked.
. If the emergency key is used to lock the driver’ s door from the outside of the vehicle, the door is locked.
& Battery Drainage Reduction Function s02ac03
Under various conditions, lights inside the vehicle will automatically turn off to reduce the risk of discharging the battery.
! Battery drainage reduction function for various conditions s02ac0302
This function will enter standby mode under the following conditions:
. The ignition switch is turned to the“ OFF” position( models with“ keyless access with push-button start system”).
. The key is removed from the ignition key cylinder( models without“ keyless access with push-button start system”).
– CONTINUED –
|
2
Keys and Doors
|