46
Seatbelts
4. Make sure that the“” mark on the anchor tongue plate and the“” mark on the anchor buckle face outwards. not on your waist.! Unfastening the seatbelt s01ae060301
5. After confirming that the webbing is not twisted, insert the anchor tongue plate attached at the webbing end into the buckle on the right-hand side until a click is heard.. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly.
. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again.
6. Insert the center seatbelt tongue plate into the center seatbelt buckle until it clicks.
7. To make the lap part tight, pull up on the shoulder belt. And place the lap belt as low as possible on your hips,
1 Button
1. Push the release button of the center seatbelt buckle( on the left-hand side) to unfasten the seatbelt.
NOTE
When the seatback is folded down for greater cargo area, it is necessary to disconnect the connector.