3-12
Instruments and controls / Illumination brightness control
edly until the item you want to change is displayed .
3 . Press and hold the TRIP RESET switch while the item to be changed is displayed , the setting of the item will be switched .
! Type B combination meter
S03AD1602
Meter and vehicle settings can be set on the combination meter display ( color LCD ). Refer to “ Menu screens ” F3-38 .
Illumination brightness control
S03AJ
The illumination brightness of the instrument panel illuminates under the following conditions .
For models without “ AUTO ” position :
. The light switch is in the “ ” or “ ” position .
For models with “ AUTO ” position :
. The light switch is in the “ ” or “ ” position when the ambient light is dark .
. The light control switch is in the “ AUTO ” position and the headlights illuminate automatically .
You can adjust the illumination brightness for better visibility .
To brighten , turn the control dial upward . To darken , turn the control dial downward .
NOTE
. When the control dial is turned fully upward , the illumination brightness becomes the maximum and the automatic dimming function does not work at all . . The brightness setting is not canceled even when the ignition switch is turned to the “ LOCK ”/“ OFF ” position .
& Auto dimmer cancel function ( if equipped )
S03AJ01
When the ambient light is bright , the illumination brightness is set to the maximum regardless of the position of the control dial . In this case , you cannot adjust the illumination brightness by using the control dial . When the ambient light is dark , you can dim the illumination brightness as described above .
The operational / non-operational setting and sensitivity of the auto dimmer cancel function can be changed by your SUBARU dealer . Contact your SUBARU dealer for details .