3-8
Instruments and controls / Hazard warning flasher
. Do not touch the push-button ignition switch with a hand soiled with oil or other contaminants . It may cause a malfunction .
. If the push-button ignition switch does not operate smoothly , stop the operation . Contact a SUBARU dealer immediately .
. If the push-button ignition switch does not illuminate even when the instrument panel illumination is turned on , have the vehicle inspected at a SUBARU dealer .
. If the vehicle was left in the hot sun for a long time , the surface of the push-button ignition switch may get hot . Be careful not to burn yourself .
NOTE
. When operating the push-button ignition switch , firmly press it all the way . . If the push-button ignition switch is pressed quickly , the power may not turn on or off . . If the indicator light on the pushbutton ignition switch flashes in green when the push-button ignition switch is pressed , steering is locked . When this occurs , press the push-button ignition switch while turning the steering wheel left and right .
! Battery drainage prevention function
S03BG0201
When the push-button ignition switch is left in the “ ACC ” or “ ON ” position for approximately 1 hour , the push-button ignition switch will be automatically switched to “ OFF ” to prevent the battery from going dead .
& When access key fob does not operate properly
S03BG03
Refer to “ Access key fob – if access key fob does not operate properly ” F9-19 .
Hazard warning flasher
S03AB
The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions . The hazard warning flasher works regardless of the position of the ignition switch .
To turn on the hazard warning flasher , push the hazard warning flasher switch on the instrument panel . All the turn signal lights and the turn signal indicator lights will flash . To turn off the flasher , push the switch again .
NOTE
When the hazard warning flasher is on , the turn signals do not work .