Keys and doors / Keyless access with push-button start system 2-13 button ( 5-door models ) twice .
3 . After a chirp sounds once , press the trunk opener button ( sedan )/ rear lock button ( 5-door models ) four times .
4 . After a chirp ( ding ) sounds once , press the trunk opener button ( sedan )/ rear lock button ( 5-door models ) six times .
5 . After a chirp ( ding ) sounds once , press the trunk opener button ( sedan )/ rear lock button ( 5-door models ) eight times .
6 . Perform steps 1 to 5 again within approximately 30 seconds after the chirp starts sounding intermittently .
7 . All doors will be unlocked and locked . Then the PIN code will be registered .
NOTE
. Press the trunk opener button ( sedan )/ rear lock button ( 5-door models ) ten times to enter “ 0 ”. . Change the PIN code frequently to protect your vehicle from theft . . If you have lent your vehicle to another person , confirm that the PIN code has not been changed or deleted . If the PIN code has been changed or deleted , reregister a new PIN code . . If you make an error during the registration procedure , press the “ ” or “ ” button on the access key fob . Then , start over from the procedure
described in “ Preparation for registering a PIN code ”. . To protect your vehicle from theft , you cannot register a string of the same five numbers together , such as “ 00000 ”, nor “ 12345 ” as a PIN code . . Do not register your vehicle license plate number or simple numbers such as “ 11122 ” or “ 12121 ” as a PIN code . Doing so will increase the risk of vehicle theft . . When you try to register “ 22222 ”, the registered PIN code will be deleted . You cannot unlock the doors by PIN Code Access until a new code is registered . . After registering a new PIN code , make sure that you can unlock the doors using the PIN code . . The PIN code cannot be deleted while the keyless access function is disabled by operating the access key fob . . Reregister the PIN code in the following case . – When you forget the PIN code – When you want to change the PIN code
! Unlocking
S02AP2103
Perform steps 1 to 5 described in “ Registration for a PIN code ”.
NOTE
. You cannot unlock by PIN Code
Access in the following cases . – When the access key fob is within the operating ranges – When the ignition switch is in the “ ACC ” or “ ON ” position . If you make an operation error during the unlocking procedure , start over with the unlocking procedure after waiting for 5 seconds or longer . . To protect your vehicle from theft , a buzzer will sound if incorrect PIN codes are entered five times continuously . If this occurs , you cannot unlock the doors by PIN Code Access for 5 minutes .
& Power saving function
S02AP23
The keyless access function will be disabled in the following cases to protect the access key fob battery and the vehicle battery .
. Case 1 : When the keyless access function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked .
Operate one of the following items to recover the keyless access function : – Unlock the doors by operating any procedure other than gripping the front
– CONTINUED –