2-12
Keys and doors / Keyless access with push-button start system
& Unlock using PIN Code Access
S02AP21
When all doors including the rear gate ( 5- door models ) are locked , you can unlock the doors ( including rear gate ) without a key by performing the following procedure .
. Sedan : Press the trunk opener button
. 5-door models : Press the rear lock button
1 ) Trunk opener button ( sedan )
1 ) Rear lock button ( 5-door models )
NOTE
PIN Code Access will be helpful if the key fob is accidentally left in the vehicle . It is recommended that a 5- digit security code ( PIN code ) be registered .
! Preparation for registering a PIN code
S02AP2101
1 . Turn off the ignition switch .
2 . Close all doors ( including trunk / rear gate ).
3 . Press and hold the “ ” button on the access key fob . Then all doors ( including rear gate ) will be locked .
4 . Keep the “ ” button pressed , and press the trunk opener button ( sedan )/ rear
lock button ( 5-door models ) within 5 seconds after step 3 .
5 . Press and hold the trunk opener button ( sedan )/ rear lock button ( 5-door models ) for more than 5 seconds . Confirm a chirp sound .
6 . Release the “ ” button and trunk opener button ( sedan )/ rear lock button ( 5-door models ).
7 . Press the “ ” button on the access key fob while the chirp sounds .
Then the chirp will stop and the preparation is complete .
NOTE
Press the “ ” button within 30 seconds of step 6 to end the preparation mode and move on to the registration stage . Unless the “ ” button is pressed within 30 seconds after step 6 , the PIN code registration will be canceled .
! Registration for a PIN code
S02AP2102
For example , to register “ 32468 ” as the PIN code , perform the following procedure .
1 . Press the trunk opener button ( sedan )/ rear lock button ( 5-door models ) three times .
2 . After a chirp sounds once , press the trunk opener button ( sedan )/ rear lock