11-40 Maintenance and service / Replacing bulbs
! 5-door models
S11BE0504
2. Open the rear portion of the trunk trim panel as illustrated.
NOTE
Make sure that the“*” part of the trunk trim in the illustration does not contact the trunk lid stay. If the“*” part is bent, the trunk trim may be torn.
1) |
Tail and rear side marker light |
2) |
Rear turn signal light |
3. Remove the bulb socket from the rear combination light assembly by turning it counterclockwise.
4. Pull the bulb out of the bulb socket and replace it with a new one.
5. Set the bulb socket into the rear combination light assembly and turn it clockwise until it locks.
6. Secure the rear trunk trim panel with the clips.
1. Remove the covers.
2. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly.