Starting and operating/Reverse Automatic Braking System
! After the vehicle is stopped by the
system
S07BN0304
NOTE
Automatic braking only holds the vehi-
cle for 2 seconds. Before the automatic
brake is released, a warning sound (3
short beeps followed by a long beep)
will activate to alert the driver that the
automatic will be released.
7-65
& Reverse Automatic Braking
system ON/OFF setting
S07BN05
While the select lever is shifted to the “R”
position, the below functions of the Re-
verse Automatic Braking system can be
set by operating the audio/navigation
monitor.
& Canceling the Reverse Auto-
matic Braking system opera-
tion
S07BN04
1)
Reverse Automatic Braking system OFF
indicator
After the brake pedal is depressed, the
Reverse Automatic Braking system OFF
indicator will illuminate and the system will
temporarily stop operating. The Reverse
Automatic Braking system OFF indicator
will turn off when the select lever is shifted
to a position other than the “R” position.
The system will operate again the next
time the select lever is shifted to “R”
position.
The Reverse Automatic Braking system
can be temporarily canceled by any of the
following operations.
. depressing the brake pedal*
. depressing the accelerator pedal*
. depressing the accelerator pedal hard
(in this case, limited acceleration will be
canceled and the vehicle will continue
reversing.)
. shifting the select lever to a position
other than the “R” position.
*: while the vehicle is stopped by the
automatic braking
NOTE
The system will be canceled if the
object is no longer detected.
1)
2)
3)
4)
ON setting key of Reverse Automatic
Braking
OFF setting key of Reverse Automatic
Braking
ON setting key of the object detection
warning beeping sound
OFF setting key of the object detection
warning beeping sound
When the ON setting key is shown, the
corresponding setting is ON.
Touch and hold the ON setting key to turn
the setting OFF.
– CONTINUED –