3-68
Instruments and controls/Light control switch
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the welcome
lighting function can be changed by a SUBARU
dealer. Contact your SUBARU dealer for de-
tails.
& Headlight flasher
CAUTION
S03AH03
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/low beam change
(dimmer)
S03AH02
! Sensor for the auto on/off head-
lights (if equipped)
S03AH0101
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
1)
2)
The sensor is on the instrument panel as
shown in the illustration.
High beam
Low beam
When the headlights are on high beam, the
high beam indicator light “ ” on the
combination meter is also on.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever.
When the headlights are on high beam, the
high beam indicator light “ ” on the
combination meter also illuminates.