2-16
Keys and doors/Keyless access with push-button start system
! Enabling functions
S02AP0702
When the procedure to disable the func-
tions is performed again, a chirp sound will
be heard, and the functions are enabled.
NOTE
. The keyless access function will be
enabled only if you perform the proce-
dure in the same manner you disabled
the function (for example, when dis-
abling by operating the driver’s door,
the function will not be enabled even if
you operate the access key fob).
. Press the push-button ignition
switch if you do not know the proce-
dure in which the keyless access func-
tion was disabled.
– When disabling by operating the
driver’s door: a chirp will not be
heard
– When disabling by operating the
access key fob: a chirp will be heard
& Selecting audible signal op-
eration
S02AP12
& When access key fob does
not operate properly
S02AP08
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer. Refer to “Access key fob – if access key
fob does not operate properly” F9-18.
NOTE Refer to “Replacing battery of access key
fob” F11-46.
& Replacing battery of access
key fob
S02AP09
For models with the combination meter
display (color LCD), the setting can be
changed by operating the combination
meter display (color LCD). For details,
refer to “Vehicle Setting” F3-42.
& Warning chimes and warning
indicator
S02AP06
The warning chime and the access key
warning light serve the following purposes:
. To minimize improper operation of the
keyless access with push-button start
system.
. To protect your vehicle from theft.
For details, refer to “Warning chimes and
warning indicator of the keyless access
with push-button start system” F3-25.
& Replacing access key fob
S02AP13
Access key fobs can be replaced at
SUBARU dealers. For more details, con-
tact a SUBARU dealer.