Keys and doors/Keyless access with push-button start system
. To start the engine while the func-
tions are disabled, perform the proce-
dure described in “Starting engine”
F9-19.
neously for more than 5 seconds.
A chirp sound will be heard, and the
function will be disabled.
! By operating the driver’s door
! Disabling functions
S02AP070101
S02AP0701
! By operating the access key fob
S02AP070102
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key fob. For details about registering a PIN
code, refer to “Preparation for registering a
PIN code” F2-12.
1. Open the driver’s door.
2. Rotate the lock lever toward the lock
position.
3. Press and hold the “ ” button and “ ”
button on the access key fob simulta-
1. Sit in the driver’s seat, and close the
door (5–door models).
2-15
6. Within 10 seconds after step 5 is
performed, push the unlock side of the
power door locking switch twice while the
door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver’s
door once.
8. Within 5 seconds after step 7 is
performed, close the door.
A chirp sound will be heard, and the
functions will be disabled.
NOTE
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
2. Push the unlock side of the power door
locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver’s door.
4. Within 5 seconds after step 3 is
performed, push the unlock side of the
power door locking switch twice while the
door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver’s
door twice.
– CONTINUED –