Chapter
Before you start
02
! Keep the detachable device out of direct sunlight and high temperatures.
! After removing the detachable device, keep it
in a safe place so it is not scratched or
damaged.
Flow from startup to
termination
1
Start the engine to boot up the system.
p To protect the LCD screen from damage, be
sure to use your fingers to touch the touch
panel keys. (The stylus is supplied for special calibrations. Do not use the stylus for
normal operations.)
3 Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
4 Read the disclaimer carefully, checking
its details, and then touch [OK] if you
agree to the conditions.
2 Turn off the vehicle engine to terminate the system.
The navigation system is also turned off.
On first-time startup
When you use the navigation system for the
first time, select the language that you want to
use.
1 Start the engine to boot up the system.
After a short pause, the navigation splash
screen comes on.
And then the “Select UI Language” screen appears.
The map screen appears.
Regular startup
2 Touch the language that you want to
use on the screen.
The “Voice Language Selection” screen appears.
14
En
% Start the engine to boot up the system.
p The screen shown will differ depending on
the previous conditions.
p When there is no route, the disclaimer appears after the navigation system reboots.
Read the disclaimer carefully, checking its
details, and then touch [OK] if you agree to
the conditions.