Chapter
Before you start
02
Plugging in a USB storage device
USB connector
1 Pull out the USB storage device after
checking that no data is being accessed.
Before you start
% Plug a USB storage device into the USB
connector.
p A USB interface cable for iPod (CD-IU50)
(sold separately) is required for connection.
USB storage device
p Compatibility with all USB storage device is
not guaranteed.
This navigation system may not achieve optimum performance with some USB storage devices.
p Connection via USB hub is not possible.
USB connector
p For more details about iPod compatibility
with this navigation system, refer to the information on our website.
p Connection via USB hub is not possible.
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the storage device, never remove it from this navigation system while data is being transferred.
! If data loss or corruption occurs on the storage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
USB interface
cable for iPod
2
Connect your iPod.
Disconnecting your iPod
% Pull out the USB interface cable for iPod
after checking that no data is being accessed.
Protecting your product
from theft
The detachable device can be removed from
the head unit to discourage theft.
= For details, refer to Removing and attaching
the detachable device on page 15.
Connecting your iPod
Using the USB interface cable for iPod enables you to connect your iPod to the navigation system.
CAUTION
! Never grip the display and the buttons tightly
or use force when removing or attaching.
! Avoid subjecting the detachable device to excessive shocks.
En
13