66
SEAT, SEATBELT AND SRS AIRBAGS
6. To tighten the lap part, pull up on the shoulder belt.
2. Insert a tongue plate or other hard pointed object into the slot in the anchor buckle on the right-hand side and push it in. The anchor tongue plate will then disconnect from the buckle.
S _ 103076-W
7. Place the lap belt as low as possible on the hips, not on the waist.
Unfastening the seatbelt s01ae0614
1. Push the release button of the center seatbelt buckle( on the left-hand side) to unfasten the seatbelt.
S _ 103200-W
3. With the belt held by hand, allow the retractor to roll up the belt slowly. You should hold the webbing end and guide it back into the retractor while it is rolling up. Neatly store the tongue plate in the recess on the ceiling and then insert the anchor tongue plate into the slot located at the front of the recess.
Button
S _ 103221-W
NOTE
When the seatback is folded down, it is necessary to disconnect the connector.
S _ 103079-W