462
IN CASE OF EMERGENCY
the fuel pump shut off function when the vehicle is struck from behind.
Rear tie-down holes s09af0107
CAUTION
. To prevent deformation to the bumper and the towing hook, do not apply an excessive load to the towing hook.
. When towing another vehicle, touch“ Rear Vehicle Detection( BSD / RCTA)” to deactivate the system. The system may not operate properly due to the blocked radar waves. For details about how to turn on / off the Rear Vehicle Detection( BSD / RCTA), refer to“ Settings icon( Car settings)” FP230.
Front tie-down hooks s09af0106
Rear tie-down hole
S _ 901526-W
The rear tie-down holes are located near each of the jack-up reinforcements.
There is a plug in each rear tie-down hole. To use the rear tie-down holes, remove the plugs. After using the rear tie-down holes, return the plugs to their original places.
S _ 901725-W
The front tie-down hooks are located between each of the front tires and the front bumper.
Front tie-down hooks are for tying down the vehicle. They are not for towing.
WARNING
Use the rear tie-down holes only for downward anchoring. If they are used to anchor the vehicle in any other direction, cables may slip out of the holes, possibly causing a dangerous situation.