Lane Departure Prevention Function
■ Canceling Lane Departure Prevention Function
●Canceling by driver operation Any of the following operations temporarily cancels Lane Departure Prevention Function. While temporarily canceling this function, the lane indicator turns gray.
• Depressing the brake pedal strongly
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane change.
• Turning on the hazard warning flasher switch
●Automatic cancellation by the system Under the following conditions, Lane Departure Prevention Function is temporarily canceled. While the function is temporarily canceled, the lane indicator turns gray.
• The system does not detect the lane markings.
• The vehicle speed is less than approximately 37 mph( 60 km / h) or is more than approximately 100 mph( 160 km / h).
• Vehicle Dynamics Control or Traction Control Function is activated.
• Any door( except the rear gate) is opened.
• The driver’ s seatbelt is unfastened.
• The electronic parking brake is applied.
• The select lever is moved to a position other than“ D”,“ M”( models with manual mode) or“ L”( models with“ L” position).
• Entering a sharp curve
• On a sharp curve
• Due to the road conditions
• Due to another system operating
• The EyeSight system has a malfunction.( EyeSight warning indicator: Yellow)
� Page 190
• The EyeSight system has stopped temporarily.( EyeSight temporary stop indicator: White)
� Page 192
140