60
SEAT, SEATBELT AND SRS AIRBAGS
3. Make sure that the“” mark on the anchor tongue plate and the“” mark on the anchor buckle face outwards.
S _ 103202-W
4. After confirming that the webbing is not twisted, insert the anchor tongue plate attached at the webbing end into the buckle on the right-hand side until a click sounds.
S _ 103075-W
6. To tighten the lap part, pull up on the shoulder belt.
S _ 103076-W
7. Place the lap belt as low as possible on the hips, not on the waist.
S _ 103074-W
. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly.
. If the belt still cannot be unlocked, give it a strong pull and let it retract slightly, then pull it out slowly again.
5. Insert the center seatbelt tongue plate into the center seatbelt buckle marked“ CENTER” on the left-hand side until it clicks.