40
SEAT, SEATBELT AND SRS AIRBAGS
The height of the seat can be adjusted by moving the seat adjustment lever up and down.
POWER SEAT( If Equipped) s01aa02
seat height control switch. To adjust the angle of the seatback:
Move the seatback angle( reclining) control switch.
To increase / decrease lower back support( driver’ s seat):
Push the front side / rear side of the lumbar support control switch.
NOTE
During forward / backward adjustment of the seat, you cannot adjust the seat cushion angle or seat cushion height.
DRIVER’ S SEAT MEMORY FUNCTION( If Equipped) s01aa03
S _ 103208-W
Seat position forward / backward control switch
Seat cushion angle control switch Seat height control switch
Seatback angle( reclining) control switch
Lumbar support control switch( driver’ s seat)
To adjust the seat forward or backward:
Move the seat position forward / backward control switch forward or backward.
To adjust the seat cushion angle:
Pull up or push down the front end of the seat cushion angle control switch.
To adjust the seat height: Pull up or push down the rear end of the
WARNING
. To avoid loss of vehicle control or personal injury, never perform the following operations while driving.
– Adjusting the seat – Retrieving the seat position
. Before adjusting the seat, make sure that cargo or the hands and feet of rear seat passengers are clear of the adjusting mechanism.
. Perform the seat position retrieval before driving. Be sure to confirm that the select lever is in the“ P” position, and the parking brake is applied, when adjusting the seat position. Do not drive until the retrieval of the seat position is complete.
. When retrieving a registered seat position, make sure the hands, feet and possessions of rear seat passengers are clear of the seat adjusting mechanism.
. When any unusual conditions or malfunctions occur during the retrieval of the seat position, stop the retrieval of the seat position by performing any of the following.