STARTING AND OPERATING 421
NOTE
. User recognition may not be possible when there is dirt or fingerprints on the user recognition camera. To clean, either wipe using a soft cloth or else wipe gently using a moistened cloth that has been thoroughly wrung out.
. When the synchronized user function is turned OFF, manual repeat facial scan is not possible.
Delete All Users
1. Touch( HOME). 2.?( Settings) 3.?“ Car” 4.?“ Driver Monitoring System” 5.?“ Delete All Users” 6.?“ Yes” s07bp0502
DELETING A USER s07bp05
Users can be registered in the Driver Monitoring System, and registered users can be deleted.
NOTE
User information can also be deleted by resetting the center information display to the factory default settings. When the settings are reset to the factory default settings, all user information is deleted. The settings cannot be reset to the factory default settings when the Driver Monitoring System is OFF.
Delete User s07bp0501
1. Touch( HOME). 2.?( Settings) 3.?“ Car” 4.?“ Driver Monitoring System” 5.?“ Delete User” 6. Select the preferred user from the list.
7.?“ Yes”
S _ 307598-W
DRIVER MONITORING SYSTEM ON / OFF SETTINGS s07bp07
NOTE
. When the Driver Monitoring System is turned OFF after user recognition was completed, the user recognition function stores the Driver Monitoring System ON / OFF state.
. Even when the Driver Monitoring System is set to OFF, the Driver Monitoring System automatically turns ON once the driver’ s door is opened and closed while the vehicle is stopped. This only occurs when the user recognition setting is ON. The system then reverts automatically to the OFF state.
. After the Driver Monitoring System was turned OFF, if the Driver Monitoring System is turned ON while the driver’ s door is open, user recognition may not occur correctly.
To turn on / off the Driver Monitoring System s07bp0701
To turn the Driver Monitoring System on and off, operate the center information display. Refer to“ Settings icon( Car settings)” FP231. When the Driver Monitoring System is turned OFF, the Driver Monitoring System OFF indicator on the combination meter display( color LCD) will illuminate.
7
– CONTINUED –