170 INSTRUMENTS AND CONTROLS
NOTE
. When operating the push-button ignition switch, firmly press it all the way.
. If the push-button ignition switch is pressed quickly, the power may not turn on or off.
. If the indicator light on the push-button ignition switch flashes in green when the push-button ignition switch is pressed, steering is locked. When this occurs, press the push-button ignition switch while turning the steering wheel left and right.
3-3. HAZARD WARNING FLASHER s03ab
Battery drainage reduction function s03bg0201
When the push-button ignition switch is left in the“ ACC” position for approximately 20 minutes or the“ ON” position( the engine is not running) for approximately 1 hour, the push-button ignition switch will be automatically switched to“ OFF” to reduce the possibility of the battery going dead.( This function is activated when the select lever is in the“ P” position.)
WHEN ACCESS KEY FOB DOES NOT OPERATE PROP- ERLY s03bg03
Refer to“ If Access Key Fob Does Not Operate Properly” FP471.
S _ 307531-W
The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position.
To turn on the hazard warning flasher, press the hazard warning flasher switch on the instrument panel. All the turn signal lights and the turn signal indicator lights will flash. To turn off the flasher, press the switch again.
NOTE
When the hazard warning flasher is on, the turn signals do not work.