134
KEYS AND DOORS
be activated when the key is inserted in the ignition switch .
. The hazard warning flashers will flash once or twice when the access key fob / transmitter button is pressed in the following cases .
– When locking the doors – When unlocking the doors – When unlocking the rear gate
If desired , you can turn the hazard warning flashers off by operating the center information display . For details , refer to the following sections .
– “ Car settings icon ” FP216 ( dual
7.0-inch display models ) – “ Settings icon ( Car settings )”
FP231 ( 11.6-inch display models )
LOCKING THE DOORS s02ae01
Press the “ ” button to lock all the doors ( including the rear gate and the fuel filler lid ). An electronic chirp will sound once and the hazard warning flashers will flash once .
If any of the doors ( including the fuel filler lid ) is not fully closed , the following will occur to alert you that the doors are not properly closed .
. An electronic chirp sounds five times .
. The hazard warning flashers flash five times .
When you close the door , it will automatically lock and then the following will occur .
. An electronic chirp sounds once .
. The hazard warning flashers flash once .
UNLOCKING THE DOORS s02ae02
Press the “ ” button to unlock the driver ’ s door and fuel filler lid . An electronic chirp will sound twice and the hazard warning flashers will flash twice . To unlock all the doors and the rear gate , briefly press the “ ” button again within 5 seconds .
NOTE
If the interval between the first and second presses of the “ ” button for unlocking all the doors is extremely short , the system may not respond .
OPENING THE REAR GATE s02ae13
Press the “ ” button to unlock the rear gate . An electronic chirp will sound twice and the hazard warning flashers will flash twice .
This operation setting can be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
SETTING AUDIBLE SIGNAL OPERATION s02ae07
Using an electronic chirp , the system will give you an audible signal when the doors lock and unlock .
If desired , you can turn the audible signal off by operating the center information display .
For details , refer to the following sections .
– “ Car settings icon ” FP216 ( dual 7.0- inch display models )
– “ Settings icon ( Car settings )” FP231 ( 11.6-inch display models )
Furthermore , the volume setting of the audible signal can also be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
Models without “ keyless access with push-button start system ”:
Perform the following steps to deactivate the audible signal . Take the same steps to restore the function .