Subaru Forester Manuals 2025 Forester eBOXER Hybrid Premier Owner's Manual | Page 474

470
APPEARANCE CARE
Before cleaning leather upholstery, vacuum it to remove dust. Use a soft and lint-free cloth dampened with lukewarm water and mild soap, taking care not to soak the leather or allow water to penetrate the stitched seams. Use a gentle circular motion while cleaning the leather- do not rub or apply extreme pressure. Wipe the leather again with another clean, slightly damp cloth to remove soap residue and dry with a soft cloth.
Minor surface blemishes or difficult dirt spots may be treated with a commercial leather spray.
CAUTION
Never use alcohol, cleaning solvents, leather oils, varnishes or polishes on your leather as it will dry out the leather finish.
If your SUBARU is to be parked for a long time in bright sunlight, it is recommended that the seats and headrests be covered, or the windows shaded, to prevent fading or shrinkage.
You will discover that each leather seat section will develop soft folds or wrinkles, which is characteristic of genuine leather.
SYNTHETIC LEATHER UP- HOLSTERY s10ac03
The synthetic leather material used on the SUBARU may be cleaned using mild soap or detergent and water, after first vacuuming or brushing away loose dirt. Allow the soap to soak in for a few minutes and wipe off with a clean, damp cloth. Commercial foam-type cleaners suitable for synthetic leather materials may be used when necessary. Much like genuine leather, some types of fabric used in clothing may transfer color to synthetic leather. If you do not clean transferred color from synthetic leather for an extended period of time, it may be difficult to remove the color, so be sure to clean any such stains from synthetic
leather promptly.
CAUTION
Strong cleaning agents such as solvents, paint thinners, window cleaner or gasoline must never be used on leather or synthetic interior materials. Doing so could damage the surface and cause the color to deteriorate.
INSTRUMENT PANEL, CON- SOLE PANEL, SWITCHES, COMBINATION METER, AND OTHER PLASTIC SURFACE s10ac04
Use a soft, damp cloth to clean the instrument panel, center console, combination meter panel, and switches.
CAUTION
. Do not use organic solvents such as paint thinners or gasoline, or strong cleaning agents that contain those solvents. Doing so could damage the surface and cause the color to deteriorate.
. Do not use chemical solvents that contain silicone on the vehicle audio system, electrical components of the air-conditioner or any switches. If silicone adheres to these parts, it may cause damage to electrical components.
CENTER INFORMATION DIS- PLAY s10ac11
To clean the center information display, wipe it with a silicone cloth or with a soft cloth. If the display( s) is / are extremely dirty, clean it with a soft cloth moistened with neutral detergent then carefully wipe off any remaining detergent.