454
IN CASE OF EMERGENCY
. When towing another vehicle, touch“ Rear Vehicle Detection( BSD / RCTA)” to deactivate the system. The system may not operate properly due to the blocked radar waves. For details about how to turn on / off the Rear Vehicle Detection( BSD / RCTA), refer to“ Settings icon( Car settings)” FP226.
Rear tie-down holes s09af0107
Front tie-down hooks
s09af0106
S _ 901444-W
The front tie-down hooks are located between each of the front tires and the front bumper.
Front tie-down hooks are for tying down the vehicle. They are not for towing.
Rear tie-down hole
S _ 901526-W
The rear tie-down holes are located near each of the jack-up reinforcements.
There is a plug in each rear tie-down hole. To use the rear tie-down holes, remove the plugs. After using the rear tie-down holes, return the plugs to their original places.
WARNING
Use the rear tie-down holes only for downward anchoring. If they are used to anchor the vehicle in any other direction, cables may slip out of the holes, possibly causing a dangerous situation.