CLIMATE CONTROL 275
only to the driver. To cancel the airflow“ DRIVER” mode, touch the“” icon, and“ ALL” will be displayed instead of“ DRI- VER”, and airflow will be directed to all the seats.
“ FRONT” mode( driver’ s seat and front passenger’ s seat are occupied):
S _ 403823-W
When the climate control system judges that the driver’ s and passenger’ s seats are occupied,“ FRONT” is displayed on the screen and the system directs the airflow to the driver and front passenger. To cancel the airflow“ FRONT” mode, touch the“” icon, and“ ALL” will be displayed instead of“ FRONT”, and airflow will be directed to all the seats.
“ ALL” mode( rear seats are occupied by passengers):
S _ 403824-W
When the climate control system judges that there are passengers occupying the rear seats,“ ALL” is displayed on the screen and the system directs the airflow to all vehicle occupants. To cancel the airflow“ ALL” mode, touch the“” icon,
and“ DRIVER” or“ FRONT” will be displayed on the screen depending on which passenger’ s seats are occupied, and airflow will be directed to the seats depending on the airflow mode.
NOTE
. Depending on the settings of the climate control system or other factors affecting the temperature inside the vehicle, the operation of the Dynamic Ventilation mode for occupants may differ from the operation displayed on the screen.
. The climate control system judges that the front passenger’ s seat is occupied by detecting such things as the fastening of the seatbelt, opening or closing of the door, and operation of the passenger’ s side temperature setting controls.
. If“ FRONT” is displayed on the screen when the front passenger’ s door is opened and then closed and the climate control system subsequently judges that the front passenger’ s seat is not occupied, the screen will display“ DRIVER” when the vehicle speed reaches approximately 13 mph( 20 km / h).
. The climate control system judges that there are passengers occupying the rear seats according to the opening and closing of the rear doors. However, touching“” icon will turn off the function that judges whether the rear doors are open or closed. To turn the function on again, turn the ignition switch to the“ OFF” position for approximately one hour.
. The system may not be able to judge the presence of passengers accurately, in which case this function may not operate properly.
4
– CONTINUED –