REAR VIEW CAMERA
HOW TO USE THE REAR VIEW CAMERA
When the select lever is set to “ R ”, the rear view camera automatically displays the rear view image from the vehicle . When the lever is set to other positions , the image before setting to “ R ” is displayed .
1 . |
Set the ignition switch to “ ON ”. |
2 . |
Set the select lever to “ R ”. |
NOTE
� 8-inch with Navi system only : While the navigation system is activated , the image of the rear view camera will not be displayed . However , the image of the rear view camera has priority over other screen displays .
� The image of the rear view camera is horizontally reversed as is the case with the vehicle rearview mirror or the side view mirror .
� ������������������������������������������������������������������ following cases . This is not a malfunction of the camera . �� The vehicle is in a dark place ( at night , in a tunnel , etc .). �� The vehicle is in an extremely hot or cold place . �� An object ( such as raindrops , snow , dirt , etc .) that disturbs the view of the rear view camera sticks to the lens of the camera . �� Strong light shined directly on the camera lens ( occasionally , there are vertical lines on the screen ). �� The vehicle is used for towing or a trailer hitch is installed .
SETTING THE
The length of tim when the select �������
VIEWING RA
CAUTION
� The range tha limited . Always backward and
The area from th Areas at both en bumper cannot view camera look
48