CAUTION
� If your vehicle is washed with a high-pressure washer , do not allow water to contact the camera directly . Water entering the camera may cause condensation on the inside of the camera lens , damage and malfunction of the camera .
� Since the camera is a precision device , do not subject it to ������� ��������� ����������� ������������� ���� ��� ��������� ������ may occur .
� If mud or snow sticks to the camera , or it freezes up , you must be very careful when removing it . Pour water or lukewarm water over the camera to remove mud and ice , and wipe it with a soft , dry cloth .
� ��� ���� ���� ��� ����� ����� ��� ���� ��� ��� ���� ������� ������ ������ Otherwise , damage to the camera may occur .
� When replacing the fuse , be sure to use a fuse with the ���������������������������������������������������������������� in a malfunction .
� If the rear view camera is used for a long time while the engine is not operated , the battery may become completely discharged .
NOTE
� Do not wipe the cam Otherwise , discolora wipe the camera wit detergent and then w
� When waxing the veh camera . If it comes i cloth with a diluted ne
� The camera lens has However , when wash be careful not to scra brush directly on the view camera may det
� Strong light shined lines around the light
� �������������������� not a malfunction . � �������������������� the actual color of the