Replacement of wiper blades 475 |
||||||||||
|
will cause deterioration of the wiper blades .
. While removing the wiper blades from the wiper arms , do not return the wiper arms to the original positions . Otherwise , the windshield surface may be scratched .
. When returning the raised wiper arms to the original positions , carefully return the wiper arms on the windshield by hand . You should not return the wiper arms to the windshield only by the return spring . Otherwise , the wiper arms may be deformed and / or the windshield surface may be scratched .
. When you are going to raise the passenger-side wiper arm , first raise the driver-side wiper arm . Otherwise , the passenger-side wiper assembly and driver-side wiper assembly will touch each other , possibly resulting in scratches .
. Return the passenger-side wiper arm to its original position before returning the driver-side wiper arm to its original position . Otherwise , the passenger-side wiper
|
assembly and driver-side wiper assembly will touch each other , possibly resulting in scratches . |
If you cannot eliminate the streaking even after following this method , replace the wiper blades using the following procedures .
& Windshield wiper blade assembly
S11AZ01
1 . Raise the wiper arm off the windshield .
CAUTION
Hold the wiper arm when replacing the wiper blade . Holding the wiper blade , may result in blade deformation .
|
1 Lock knob
2 . Hold the wiper blade connection by hand , push the lock knob to release the lock , and then pull out the wiper blade assembly .
NOTE
Do not use a hard object to push the lock knob . The lock knob may be scratched .
|
Maintenance and service |
||||||
– CONTINUED – |