450
Maintenance precautions
tempt to take its connectors apart , as this may activate the system or render it inoperative . NEVER use a circuit tester for this wiring . If your SRS airbag or seatbelt pretensioner needs service , consult your nearest SUBARU dealer .
. Check the inside of the engine compartment to see if there are any cloths and tools left . If they are left inside , they may be a cause of malfunction and fire .
NOTE
SUBARU does not endorse the use of non-SUBARU approved flushing systems and strongly advises against performing these services on a SUBARU vehicle . Non-SUBARU approved flushing systems use chemicals and / or solvents which have not been tested or approved by SUBARU . SUBARU warranties do not cover any part of the vehicle which is damaged by adding or applying chemicals and / or solvents other than those approved or recommended by SUBARU .
& Before checking or servicing in the engine compartment
S11AB01
WARNING
. Always stop the engine and apply the parking brake firmly to prevent the vehicle from moving .
. Always let the engine cool down . Engine parts become very hot when the engine is running and remain hot for some time after the engine has stopped .
. Do not spill engine oil , engine coolant , brake fluid or any other fluid on hot engine components . This may cause a fire .
. When the ignition switch is in the “ ON ” position , the cooling fan may operate suddenly even when the engine is stopped . If your body or clothes come into contact with a rotating fan , that could result in serious injury . To avoid risk of injury , perform the following precautions .
– Models with push-button start system : Always turn the push-button ignition switch to the “ OFF ” position and confirm that the
operation indicator on the switch is turned off . Then take the access key fob out from the vehicle .
– Models without push-button start system : Always remove the key from the ignition switch .
. Before performing any servicing on a vehicle equipped with a remote engine start system ( a dealer option ), temporarily place the remote engine start system in service mode to prevent it from unexpectedly starting the engine .