Rear seats 39 |
|||||||
|
sensor behind the driver ’ s door handle . However , the memory position can still be retrieved by pressing the “ ” button on the access key fob . For information about how to enable / disable the keyless access function , refer to “ Disabling keyless access function ” FP122 .
. If a new position is registered for the same access key fob , the previously registered memory position data will be deleted .
. If you are carrying 2 or more access keys , seat position retrieval may not be possible .
. If , while carrying an access key , 45 seconds passed after you enter the operating range of the keyless access function , it may not be possible to retrieve the registered memory position even if the door is open . For the operating range of the keyless access function , refer to “ Locking and unlocking by holding the access key fob ” FP115 .
! Clearing the registered seat position with access key fob
S01AQ060305
1 . Close the driver ’ s door .
2 . Hold the access key fob and press and hold the “ SET ” button , then press the “ ” button on the access key fob .
|
A chirp will sound , and the registered seat position and outside mirror angle on the passenger ’ s side will be cleared .
NOTE
After deleting the seat position , wait for a few moments before registering a new seat position .
|
1-2 . Rear seats
WARNING
S01AC
|
Seatbelts provide maximum restraint when the occupant sits back and upright in the seat . Do not place cushions or any other materials between occupants and seatbacks or seat cushions . By doing so , the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase , and both can result in serious injury or death . |
Seat , seatbelt and SRS airbags |
|||
– CONTINUED – |