38
Seats
1 . Turn the ignition switch to the “ ON ” position .
2 . Put the select lever is in the “ P ” position and apply the parking brake , then press button “ 1 ” or “ 2 ”.
A chirp will sound and the seat and outside mirror move to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. If the vehicle battery is removed , the registered memory position data will not be deleted .
. When the button “ 1 ” or “ 2 ” is pressed within 45 seconds after the driver ’ s door is opened , the registered memory position can be retrieved even if the ignition switch is in the “ LOCK ” or “ OFF ” position .
. If buttons “ 1 ” and “ 2 ” are pressed at the same time , execution of seat position retrieval may not be possible .
. When the retrieved position is the same as the current seat position , a chirp will sound twice .
! Retrieval of the memory position registered with access key fob
S01AQ060304
1 . Hold the registered access key fob .
2 . Unlock the driver ’ s door by pressing the “ ” button or touching the sensor behind the door handle .
3 . Open the driver ’ s door .
A chirp will sound and the seat and angle of the outside mirrors moves to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. A retrieved seat position might deviate as the function is used continuously over time .
. A retrieved seat position might deviate if you attempt to continue operating the registered seat in the same direction when the registered seat is already at the farthest possible point of adjustment in any direction .
. If the registered memory position cannot be retrieved after performing the previous procedures , try the following procedures . ( 1 ) Press the “ SET ” button on the driver ’ s door .
( 2 ) Press the “ ” button on the access key fob or the door lock button to lock the doors .
( 3 ) Perform the prior procedures again .
. If the keyless access function is disabled , the memory position cannot be retrieved by touching the